FS-01 Optical Fiber Fusion Splicer

FS-01 Optical Fiber Fusion Splicer

Optical Fiber Fusion Splicer

Download instructions




Descriptionof this FS-01 Optical Fiber Fusion Splicer



Optical Fiber Fusion Splicer is small size optical fiber fusions splicer, mainly used for fusion and protection of common communications fibers.

The rich functionality and ultra-low splice loss make the splicer adaptive to fiber splicing in various environments. It is featured with small size, light weight, high reliability, greater environmental adaptability, dust-resistant, water-resistant and shock-resistant. Multiple fusion modes and heating modes are available to meet diversified customers’ demands. Fiber loading becomes more convenient and accurate thanks to the ceramic V-groove of high precision, which is easy for clean and maintenance.

The splicer is capable of dual-directional fusion. The monitor is a touch screen delivers fresh designed graphical interfaces, which are simple for operation. The modular pluggable lithium-ion battery of large-capacity ensures long-time field operations. The auto environment compensation system greatly improves adaptability of the splicer to hostile environments, so that low-loss splice can be remained consistent in various environments.  



  • Small size, light weight
  • 7s fast splicing, 18s highly efficient heating
  • 320 times image magnification, 5mm fusing for ultra-short cleave length
  • 300 groups of splice modes, 100 groups of heating modes, 10000 groups of fusion records /64 images storage
  • Ceramic presser foot, ceramic V-groove, all-in-one fixture
  • Dual-directional fusing, auto fusing, intelligent heat shrink
  • USB and SD card interface, auto update of U disk
  • Built-in modular lithium-ion battery, at least 220 counts of splicing and heating cycles
  • GUI (graphical user interface) and touch screen, convenient for operation
  • Dust-resistant, water-resistant, shock-resistant, greater environment adaptability

Parameter  of this FS-01 Optical Fiber Fusion Splicer


Technical Specifications


   Optical Fiber Fusion Splicer

  Motor qty


  Alignment method

  Cladding alignment, manual alignment

  Applicable fibers

  Any common optical fibers, rubber-insulated fibers and jumpers that meet requirements of ITU-TG.651~653, ITU-TG.655 and ITU-TG.657.

  Optical fiber diameter

  Cladding: 80~150μm, coating layer: 0.1~3mm

  Cleave length

  5~16mm(coated optical fiber diameter ≤250μm);

  10mm(coated optical fiber diameter: 0.25~3mm:

  Splice loss(typical)

  0.02dB(SMF); 0.01dB(MMF); 0.04dB(DSF); 0.04dB(NZDSF)

  Return loss

  Better than 60dB

  Splicing time (typical)

  7s (Fast mode)

  Heating time (typical)

  28s (60mm protection sleeve)



  Protection sleeve

  60mm, 40mm and a series of protection sleeves

  Graphical display

  High-performance 4.3 inch LCD

  Magnification time

  320 times/88 times

  Fusion records

  10000 groups

  Remote maintenance


  Battery capacity

  11.1V, 6800mAh

  Battery service life

  Cycle charging: 300~500 counts, can be replaced by customers

  Electrode service life

  Typical: 4000 counts, can be replaced by customers

  Construction lighting

  Built-in lights with high-brightness and wide lighting area

  Working environment

  Temp:-10~50℃;Hum: 0~95%RH,height above sea level: 0~6000m

   Operation interfaces

  GUI (graphical user interfaces)

  External power

  AC: 100~240V, 60Hz, 0~1.5A; DC: 10~15V


  USB / SD


  120mm(W)×130mm(H)×154mm(D) (without rubber anti-vibration pad)


  1.7kg (the battery not included), 2.0kg(included the battery)


Image  of this FS-01 Optical Fiber Fusion Splicer


Our Factory  of this FS-01 Optical Fiber Fusion Splicer

Our factory has more experience in production FS-01 Optical Fiber Fusion Splicer,and we can provide multiple types related products. If you want to know more details about these, welcome to contact us!

Our Service  of this FS-01 Optical Fiber Fusion Splicer

We have standardization process in production FS-01 Optical Fiber Fusion Splicer, and ensuring our product’s quality.We have professional pre-sales team, they can answer your each questions.We have hard-working after-sales team, who are providing after-sales service and protection for our clients.

Corporate vision:To be the benchmark for the optical fiber industry.

Corporate Mission:Leading the industry; Providing satisfiedcommunication products, solutions and services to worldwide customers.

 To invest in both personal and corporate growth simultaneously.

Core Values:Creating Customer Value. Insisting on R & D and Innovation. Building a Global Network. Adhering to Humanistic Management .

 Looking forward to your inquiry for this FS-01 Optical Fiber Fusion Splicer.



You might also like