Up to 1.25Gbps bi-directional data links 1550nm DFP laser and PIN photo detector for 20km transmission Compliant with SFP MSA and SFF-8472 with single LC receptacle Digital Diagnostic Monitoring: Internal Calibration or External Calibration Compatible with SONET Compatible with RoHS +3.3V single power supply
Adopting advanced attenuation fiber technology, The Build-out design can be easily inserted between the connector and the adapter to bring the optical power levels within the operating range of the receiver. The front of the attenuator is a male plug connector style, allowing the attenuators to be plugged directly into receiver equipment or adaptors in patch panel. The rear is a female socket adaptor allowing a patch cord to be mated into the back of the attenuator. The versatility of this design allows the Attenuators to be placed Inline, directly in front of the receiver, or at other points in the network such as distribution frames and cabinets. Their remarkable stability over a wide temperature range (-40 ºC to +75 ºC) permits their deployment in central offices, and in remote sites such as cabinets, huts or underground vaults. Available in single mode or multimode, FC, SC, ST, LC type.
Up to 1.25Gbps data links 1310nm FP laser and photo PIN detector for 40km transmission Compliant with SFP MSA and SFF-8472 with Duplex LC receptacle Digital Diagnostic Monitoring: Internal Calibration or External Calibration Compatible with SONET Compatible with RoHS +3.3V single power supply Operating case temperature: Standard :0 to +70°C Industrial : -40 to +85°C
Description of this X2-D10XX-40 10Gbps DWDM X2 Optical Transceiver 40km Reach High Quality Features Compatible with X2 MSA Rev2.0b Support of IEEE 802.3ae 10GBASE-ER at 10.3125Gbps Transmission Dista
AOA offers a variety of ST-FC fiber optic patch cord in Simplex, Duplex and Mini Zip, single mode(SM) and multi mode(MM); The FC-ST patch cords assemblies that could be built to your specification. Please contact AOA for any custom specification patch cords.
Loose Tube Aluminum Armored Cable
Coarse wavelength division multiplexer (CWDM Mux/Demux) utilizes thin film coating technology and proprietary design of non-flux metal bonding micro optics packaging. It provides low insertion loss, high channel isolation, wide pass band, low temperature sensitivity and epoxy free optical path.
CWDM fiber connector Low Insertion Loss Wide pass band High Channel Isolation High Stability and reliability Epoxy-free on Optical Path