Description of this XFP-10G-LR 10Gbps SM XFP Transceiver 1310nm 10KM Reach Online Wholesale Features Supports 8.0Gb/s to 11.1Gb/s bit rates Hot-pluggable XFP footprint, Built-in digital diagnose Maxi
The IES1104P series Industrial POE Switch is the ideal solution for powering remote devices such as IP phones, video cameras, wireless access points, alarms, traffic controllers, sensors and tracking devices, which are installed 100m far from a Power over Ethernet switch. In addition to transmitting data, the twisted-pair port also injects power down the cable, allowing a remote Power over Ethernet Device to operate without the need of any additional power source. All Power over Ethernet Powered Devices (IEEE 802.3af/at complaint) are supported, as the IMC1100P series can deliver a full 15.4W / 30W of power to the remote device.
AOA offers a variety of SC-FC fiber optic patch cord in Simplex, Duplex and Mini Zip, single mode(SM) and multi mode (MM); The FC-SC patch cords assemblies that could be built to your specification. Please contact AOA for any custom specification patch cords.
The E2000 Connector /LX-5 is like a LC but with a shutter over the end of the fiber.
MPO fiber optic patch cord is a multi-fiber patch cord with fiber count of 4, 8 or 12. Fiber optics MPO connectors use Precision molded MT ferrules, together with metal guide pins and precise housings ensuring fiber alignment when mating.
AOM-1100D Serial 10/100M Fiber Media Converter translates the signal from a twist-pair 10/100Base-TX cable to 100Base-FX fiber optic cable, extends data transmission distance from 100m via copper cables to 120km by fiber optic cable, which supports LFP (Link Fault Pass-through) function & USB Powered.
CWDM fiber connector Low Insertion Loss Wide pass band High Channel Isolation High Stability and reliability Epoxy-free on Optical Path
Up to 155Mbps data links 1310nm FP laser and photo PIN detector for 20km transmission Compliant with SFP MSA and SFF-8472 with single LC receptacle Digital Diagnostic Monitoring: Internal Calibration or External Calibration Compatible with SONET Compatible with RoHS +3.3V single power supply Operating case temperature: Standard :0 to +70°C Industrial : -40 to +85°C