Description of this X2-D10XX-40 10Gbps DWDM X2 Optical Transceiver 40km Reach High Quality Features Compatible with X2 MSA Rev2.0b Support of IEEE 802.3ae 10GBASE-ER at 10.3125Gbps Transmission Dista
HD Video to fiber converters adopt the advanced uncompressed HD composite video and high velocity digital optical transmission technologies which convert the HD video composite signals to optical signals to achieve long distance(as far as 80Km) transmission through fibers.
Description of this High Quality Industrial POE Ethernet Switch IES3104P Item Industrial POE Ethernet Switch Series No. IES3104P Description 4 x 10/100/1000Base-T POE to 1000Base-X Overview The IES31
The AOA single-mode Planar Lightwave Circuit Splitter (PLCS) are developed based on unique silica glass waveguide process with reliable precision aligned fiber pigtail in a miniature package, it provides a low cost light distribution solution with small form factor and high reliability.
Supports up to 10.7Gbps bit rates Hot-pluggable SFP+ footprint 850nm VCSEL laser and PIN photodiode, Up to 300m for OM3-MMF transmission Compliant with SFP+ MSA and SFF-8472 with duplex LC receptacle Compatible with RoHS Single +3.3V power supply Real Time Digital Diagnostic Monitoring Operating case temperature: Standard: 0 to +70°C Industrial: -40 to +85°C
Up to 1.25Gbps bi-directional data links 1310nm FP laser and PIN photo detector for 2km transmission Compliant with SFP MSA and SFF-8472 with single LC receptacle Digital Diagnostic Monitoring: Internal Calibration or External Calibration Metal enclosure, for lower EMI Compatible with RoHS +3.3V single power supply Operating case temperature: Standard: 0 to +70ºC Industrial: -40 to +85ºC
The SFP transceivers are high performance, cost effective modules supporting 1.25Gbps and 20km transmission distance with SMF. The transceiver consists of three sections: a FP laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement (MSA). For further information, please refer to SFP MSA.
Adopting advanced attenuation fiber technology, The Build-out design can be easily inserted between the connector and the adapter to bring the optical power levels within the operating range of the receiver. The front of the attenuator is a male plug connector style, allowing the attenuators to be plugged directly into receiver equipment or adaptors in patch panel. The rear is a female socket adaptor allowing a patch cord to be mated into the back of the attenuator. The versatility of this design allows the Attenuators to be placed Inline, directly in front of the receiver, or at other points in the network such as distribution frames and cabinets. Their remarkable stability over a wide temperature range (-40 ºC to +75 ºC) permits their deployment in central offices, and in remote sites such as cabinets, huts or underground vaults. Available in single mode or multimode, FC, SC, ST, LC type.