Products: 10g fiber

 

10 Gigabit Gigabit Ethernet Media Converter Sfp Module

Description of this 10 Gigabit Gigabit Ethernet Media Converter Sfp Module Item 10 Gigabit Fiber Media Converter Model NO. AOM-5100-SFP Description 10GBase-R to 10GBase-T Overview AOM-5100-SFP 10G Me

SC Bare Fiber Optic Adaptor

SC Bare Fiber Optic Adapter can link bared optic and light source ,testing equipment, light appearance etc, and the products used for test appearance and temporary conjunction between fiber optics extensively (repair fiber optic cable urgently).

XFP-10G-SR 10Gbps MM XFP Transceiver 850nm 300M Reach

Description of this XFP-10G-SR 10Gbps MM XFP Transceiver 850nm 300M Reach Features Supports 8.0Gb/s to 11.1Gb/s bit rates Hot-pluggable XFP footprint, Built-in digital diagnose Maximum link length of

Fiber Optic Attenuator AT-FM-FC

Adopting advanced attenuation fiber technology, The Build-out design can be easily inserted between the connector and the adapter to bring the optical power levels within the operating range of the receiver. The front of the attenuator is a male plug connector style, allowing the attenuators to be plugged directly into receiver equipment or adaptors in patch panel. The rear is a female socket adaptor allowing a patch cord to be mated into the back of the attenuator. The versatility of this design allows the Attenuators to be placed Inline, directly in front of the receiver, or at other points in the network such as distribution frames and cabinets. Their remarkable stability over a wide temperature range (-40 ºC to +75 ºC) permits their deployment in central offices, and in remote sites such as cabinets, huts or underground vaults. Available in single mode or multimode, FC, SC, ST, LC type.

IES3105 SFP Industrial Gigabit Ethernet Switch

4 x 10/100/1000Base-T to 1 x 10/100/1000Base-T + 1000Base-X

ST-ST Fiber Optic Adapter

Mating sleeve fiber optic adapters allow users to couple from one connector type to another same type. ST Adapter is comprised of a polymer/metal outer body and inner assembly fitted with a precision alignment mechanism. ST Optical Adapters are precision made and manufactured to demanding specifications. The combination of a ceramic/phosphor bronze alignment sleeves and precision molded polymer housing provides consistent long-term mechanical and optical performance.

SFP-B1235L-40 1.25Gbps SFP Bi-Di Transceiver 40km Reach TX 1310 RX1550nm

The SFP transceivers are high performance, cost effective modules supporting dual data-rate of 1.25Gbps and 40km transmission distance with SMF. The transceiver consists of three sections: a DFP laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement (MSA). For further information, please refer to SFP MSA.

FC-ST Fiber Optic Adapter- Hybrid

The optical Fiber Adapter is the connection part in the active optical connectors. AOA offers the full range of adapters including FC,SC,ST and hybrid adapters. These adapters are widely used in ODF, optic-fiber communications equipment, optical fiber instruments etc.