If you are interested in2 sfp,SHENZHEN AOA TECHNOLOGY CO.,LTD has found 1 related results, so you can compare and shop! Try finding the one that is right for you by choosing the price range, brand, or specifications that meet your needs.
Up to 1.25Gbps bi-directional data links 1550nm DFP laser and PIN photo detector for 120km transmission Compliant with SFP MSA and SFF-8472 with single LC receptacle Digital Diagnostic Monitoring: Internal Calibration or External Calibration Compatible with SONET Compatible with RoHS +3.3V single power supply Operating case temperature: Standard :0 to +70°C Industrial : -40 to +85°C
Description of this High Quality Fiber Media Converter AOM 3100D Item Fiber Media Converter Model No. AOM-3100D Description 10/100/1000Base-T to 1000Base-X with LFP Overview AOM-3100D Serial 10/100/1
Description of this Industrial POE Ethernet Switch IES1204P-SFP Overview The IES1204P series Industrial POE Switch is the ideal solution for powering remote devices such as IP phones, video cameras,
Drop Cable Patch Cord, with Connector pre-terminated on both ends. The operator could directly plug the cable to the adapter without splicing in field, which will decrease the loss of the optical distribution network, as well as decrease the operation time in the subscriber end.
The IES1104P series Industrial POE Switch is the ideal solution for powering remote devices such as IP phones, video cameras, wireless access points, alarms, traffic controllers, sensors and tracking devices, which are installed 100m far from a Power over Ethernet switch. In addition to transmitting data, the twisted-pair port also injects power down the cable, allowing a remote Power over Ethernet Device to operate without the need of any additional power source. All Power over Ethernet Powered Devices (IEEE 802.3af/at complaint) are supported, as the IMC1100P series can deliver a full 15.4W / 30W of power to the remote device.
HD-SDI/3G-SDI video digital optical converter adopts international advanced all-digital gigabit optical fiber transmission technology, the HD-SDI/3G-SDI video signal can be transmitted through 1 fiber with non- Distortion, high-quality, long-distance transmission.This series of video to fiber converter has Stable performance, clear picture quality., and high Stability with LED Status Indication on the body of device. The working status of devices can be visually observed. At the same time, the switch value, voltage, working status and other reverse useful signal information can be controlled by RS485 or RS232.This makes our devices more flexible when different customers’ request comes.
Supports up to 10.7Gbps bit rates Hot-pluggable SFP+ footprint 100GHz ITU, C Band DWDM Cooled EML laser and APD photodiode, Up to 80km for SMF transmission Compliant with SFP+ MSA and SFF-8472 with duplex LC receptacle Compatible with RoHS Single +3.3V power supply Real Time Digital Diagnostic Monitoring Operating case temperature: Standard: -5 to +70°C
Adopting advanced attenuation fiber technology, The Build-out design can be easily inserted between the connector and the adapter to bring the optical power levels within the operating range of the receiver. The front of the attenuator is a male plug connector style, allowing the attenuators to be plugged directly into receiver equipment or adaptors in patch panel. The rear is a female socket adaptor allowing a patch cord to be mated into the back of the attenuator. The versatility of this design allows the Attenuators to be placed Inline, directly in front of the receiver, or at other points in the network such as distribution frames and cabinets. Their remarkable stability over a wide temperature range (-40 ºC to +75 ºC) permits their deployment in central offices, and in remote sites such as cabinets, huts or underground vaults. Available in single mode or multimode, FC, SC, ST, LC type.