Products: 4 port fiber media converter

 

SFP-B1553L-20 155Mbps Bi-Di SFP Optical Transceiver Sfp

Up to 155Mbps data links 1550nm FP laser and photo PIN detector for 20km transmission Compliant with SFP MSA and SFF-8472 with single LC receptacle Digital Diagnostic Monitoring: Internal Calibration or External Calibration Compatible with SONET Compatible with RoHS +3.3V single power supply Operating case temperature:     Standard :0 to +70°C     Industrial : -40 to +85°C

SFP-10G-SR 10Gbps MM SFP+ Transceiver, 850nm, 300M Reach

Supports up to 10.7Gbps bit rates Hot-pluggable SFP+ footprint 850nm VCSEL laser and PIN photodiode, Up to 300m for OM3-MMF transmission Compliant with SFP+ MSA and SFF-8472 with duplex LC receptacle Compatible with RoHS Single +3.3V power supply Real Time Digital Diagnostic Monitoring Operating case temperature: Standard:  0 to +70°C Industrial: -40 to +85°C

SC Bare Fiber Optic Adaptor

SC Bare Fiber Optic Adapter can link bared optic and light source ,testing equipment, light appearance etc, and the products used for test appearance and temporary conjunction between fiber optics extensively (repair fiber optic cable urgently).

FC Female-male Fiber Optic Adapter

The optical Fiber Adapter is the connection part in the active optical connectors. AOA offers the full range of adapters including FC,SC,ST and hybrid adapters. These adapters are widely used in ODF, optic-fiber communications equipment, optical fiber instruments etc.

SFP-B1032L-60 10Gbps SFP+ Bi-Di Transceiver

Supports up to 10.7Gbps bit rates Hot-pluggable SFP+ footprint 1330nm DFB laser and APD photodiode, Up to 60km for SMF transmission Compliant with SFP+ MSA and SFF-8472 with duplex LC receptacle Compatible with RoHS Single +3.3V power supply Real Time Digital Diagnostic Monitoring Operating case temperature: Standard:  0 to +70°C Industrial: -40 to +85°C

AOC-10G-001 10Gbps SFP+ Active Optical Cables

Electrical interface compliant to SFF-8431 Hot Pluggable 850nm VCSEL transmitter, PIN photo-detector receiver Up to 300m on OM3 MMF Operating case temperature: 0 to 70℃ All-metal housing for superior EMI performance

Fiber Optic Attenuator AT-FF-LC

To ensure proper performance and to maximize the life of optical receivers, the power received by these photodetectors must fall within their dynamic or operating range. For this reason, fiber optic transmission systems often use Attenuators to reduce or balance the power in the passive optical network.