If you are interested in5 port network switch,SHENZHEN AOA TECHNOLOGY CO.,LTD has found 2 related results, so you can compare and shop! Try finding the one that is right for you by choosing the price range, brand, or specifications that meet your needs.
The IES1104P series Industrial POE Switch is the ideal solution for powering remote devices such as IP phones, video cameras, wireless access points, alarms, traffic controllers, sensors and tracking devices, which are installed 100m far from a Power over Ethernet switch. In addition to transmitting data, the twisted-pair port also injects power down the cable, allowing a remote Power over Ethernet Device to operate without the need of any additional power source. All Power over Ethernet Powered Devices (IEEE 802.3af/at complaint) are supported, as the IMC1100P series can deliver a full 15.4W / 30W of power to the remote device.
Item Industrial POE Ethernet Switch Model No. IES3208P-SFP Description 8 x 10/100/1000Base-T POE to 2 x 1000Base-X
Up to 10Gb/s bi-directional data links Hot-pluggable SFP+ footprint Fully metallic enclosure for low EMI Low power dissipation Compact RJ-45 connector assembly Access to physical layer IC via 2-wire serial bus Supports Links up to 30m using Cat 6a/7 Cable RoHS Compliant Operating case temperature: 0℃ to 70℃
Up to 155Mbps data links 1310nm FP laser and photo PIN detector for 20km transmission Compliant with SFP MSA and SFF-8472 with single LC receptacle Digital Diagnostic Monitoring: Internal Calibration or External Calibration Compatible with SONET Compatible with RoHS +3.3V single power supply Operating case temperature: Standard :0 to +70°C Industrial : -40 to +85°C
Description of this SFP-B1553L-80 155Mbps Bi Di Optical Transceiver For Sale Features Up to 155Mbps data links 1550nm SFP laser and photo PIN detector for 80km transmission Compliant with SFP MSA and
AOA offers a variety of FC-LC fiber optic patch cord in Simplex, Duplex and Mini Zip, single mode(SM) and multi mode(MM); The LC-FC patch cords assemblies that could be built to your specification. Please contact AOA for any custom specification patch cords.
MU is a small form factor SC. It has the same push/pull style, but can fit 2 channels in the same footprint of a single SC. MU was developed by NTT. The MU connector looks a miniature SC with a 1.25 mm ferrule. It is a popular connector type in Japan
Adopting advanced attenuation fiber technology, The Build-out design can be easily inserted between the connector and the adapter to bring the optical power levels within the operating range of the receiver. The front of the attenuator is a male plug connector style, allowing the attenuators to be plugged directly into receiver equipment or adaptors in patch panel. The rear is a female socket adaptor allowing a patch cord to be mated into the back of the attenuator. The versatility of this design allows the Attenuators to be placed Inline, directly in front of the receiver, or at other points in the network such as distribution frames and cabinets. Their remarkable stability over a wide temperature range (-40 ºC to +75 ºC) permits their deployment in central offices, and in remote sites such as cabinets, huts or underground vaults. Available in single mode or multimode, FC, SC, ST, LC type.