Products: 74act574

 

SFP-B1254L-80 1.25Gbps SFP Bi-Directional Transceiver New

Up to 1.25Gbps bi-directional data links 1550nm DFP laser and PIN photo detector for 80km transmission Compliant with SFP MSA and SFF-8472 with single LC receptacle Digital Diagnostic Monitoring: Internal Calibration or External Calibration Compatible with SONET Compatible with RoHS +3.3V single power supply Operating case temperature:     Standard :0 to +70°C     Industrial : -40 to +85°C

Hight Quality Industrial POE Ethernet Switch IES1104P

The IES1104P series Industrial POE Switch is the ideal solution for powering remote devices such as IP phones, video cameras, wireless access points, alarms, traffic controllers, sensors and tracking devices, which are installed 100m far from a Power over Ethernet switch. In addition to transmitting data, the twisted-pair port also injects power down the cable, allowing a remote Power over Ethernet Device to operate without the need of any additional power source. All Power over Ethernet Powered Devices (IEEE 802.3af/at complaint) are supported, as the IMC1100P series can deliver a full 15.4W / 30W of power to the remote device.

SFP-B1254L-120 1.25Gbps SFP Bi-Directional Transceiver 120km

Up to 1.25Gbps bi-directional data links 1550nm DFP laser and PIN photo detector for 120km transmission Compliant with SFP MSA and SFF-8472 with single LC receptacle Digital Diagnostic Monitoring: Internal Calibration or External Calibration Compatible with SONET Compatible with RoHS +3.3V single power supply Operating case temperature:     Standard :0 to +70°C     Industrial : -40 to +85°C

DWDM Module 4, 8,16 Channel DWDM 100GHz Dense Wavelength Division Multiplexer

100GHz dense wavelength division multiplexer (DWDM module) utilizes thin film coating technology and proprie tary design of non-flux metal bonding micro optics packaging to achieve optical add and drop at the ITU wavelengths. It provides ITU channel center wavelength, low insertion loss, high channel isolation, wide pass band, low temperature sensitivity and epoxy free optical path. It can be used for wavelength add/drop in telecommunication network system.

Fiber Termination Box AOT RMS

Fiber Termination Box AOT RMS for selling.

SC-ST Fiber Optic Adapter- Hybrid

The optical Fiber Adapter is the connection part in the active optical connectors. AOA offers the full range of adapters including FC,SC,ST and hybrid adapters. These adapters are widely used in ODF, optic-fiber communications equipment, optical fiber instruments etc.

32 Port Splitter Distribution Box AOT-FDB-32D

32 Port Splitter Distribution Box AOT-FDB-32D

SFP-D10XXL-40 10Gbps DWDM SFP+ Transceiver 40km Reach

Supports up to 10.7Gbps bit rates Hot-pluggable SFP+ footprint 100GHz ITU, C Band DWDM Cooled EML laser and PIN photodiode, Up to 40km for SMF transmission Compliant with SFP+ MSA and SFF-8472 with duplex LC receptacle Compatible with RoHS Single +3.3V power supply Real Time Digital Diagnostic Monitoring Operating case temperature: Standard:  -5 to +70°C