Products: best wire strippers

 

SFP-B1253L-40 1.25Gbps SFP Bi-Di Transceiver New

Up to 1.25Gbps bi-directional data links 1550nm DFP laser and PIN photo detector for 40km transmission Compliant with SFP MSA and SFF-8472 with single LC receptacle Digital Diagnostic Monitoring: Internal Calibration or External Calibration Compatible with SONET Compatible with RoHS +3.3V single power supply Operating case temperature: Standard :0 to +70°C Industrial : -40 to +85°C The transceiver consists of three sections: a DFP laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement (MSA). For further information, please refer to SFP MSA.

SFP-B1245L-120 1.25Gbps SFP Bi-Di Transceiver, 120km Reach TX1490 RX1550nm

Up to 1.25Gbps bi-directional data links 1490nm DFP laser and PIN photo detector for 120km transmission Compliant with SFP MSA and SFF-8472 with single LC receptacle Digital Diagnostic Monitoring: Internal Calibration or External Calibration Compatible with SONET Compatible with RoHS +3.3V single power supply Operating case temperature:Standard :0 to +70°C   Industrial : -40 to +85°C

XFP-10G-LR 10Gbps SM XFP Transceiver 1310nm 10KM Reach Online Wholesale

Description of this XFP-10G-LR 10Gbps SM XFP Transceiver 1310nm 10KM Reach Online Wholesale Features Supports 8.0Gb/s to 11.1Gb/s bit rates Hot-pluggable XFP footprint, Built-in digital diagnose Maxi

SFP-GB-T3 10 100 1000Mbps Copper SFP Transceiver New

Up to 1.25Gb/s bi-directional data links Hot-pluggable SFP footprint Extended case temperature range (0°C to +70°C ) Fully metallic enclosure for low EMI Low power dissipation (1.05 W typical) Compact RJ-45 connector assembly Access to physical layer IC via 2-wire serial bus 1000 BASE-T operation in host systems with SERDES interface 10/100/1000Mbps compliant in host systems with SGMII interface

MTRJ Fiber Optical Patch Cord

MT-RJ fiber optic patch cord stands for Mechanical Transfer Registered Jack. MT-RJ is a fiber-optic cable connector that is very popular for small form factor devices due to its small size. Housing two fibers and mating together with locating pins on the plug.

Fiber Optic Attenuator AT-LI-SC

Inline fixed attenuator can provide different degrees of attenuation according to needs. The product is used in different kinds of fiber optic transmission lines, according to specific needs to carry out precise attenuation. We use optical fiber structure in the linear fixed attenuator, therefore making the stability more reliable.

MTRJ Fiber Optic Adapter

MTRJ Fiber Optic Adapters are comprised of a metal outer body and inner assembly fitted with a precision alignment mechanism. Refer to the diagram above for dimensional information. MTRJ Optical Adapters are precision made and manufactured to demanding specifications. The combination of a ceramic/phosphor bronze alignment sleeves and precision metal housing provides consistent long-term mechanical and optical performance.