The IES1104P series Industrial POE Switch is the ideal solution for powering remote devices such as IP phones, video cameras, wireless access points, alarms, traffic controllers, sensors and tracking devices, which are installed 100m far from a Power over Ethernet switch. In addition to transmitting data, the twisted-pair port also injects power down the cable, allowing a remote Power over Ethernet Device to operate without the need of any additional power source. All Power over Ethernet Powered Devices (IEEE 802.3af/at complaint) are supported, as the IMC1100P series can deliver a full 15.4W / 30W of power to the remote device.
Description of this High Quality Industrial POE Ethernet Switch IES3104P Item Industrial POE Ethernet Switch Series No. IES3104P Description 4 x 10/100/1000Base-T POE to 1000Base-X Overview The IES31
Up to 1.25Gbps bi-directional data links 1490nm DFP laser and PIN photo detector for 120km transmission Compliant with SFP MSA and SFF-8472 with single LC receptacle Digital Diagnostic Monitoring: Internal Calibration or External Calibration Compatible with SONET Compatible with RoHS +3.3V single power supply Operating case temperature:Standard :0 to +70°C Industrial : -40 to +85°C
LC Fiber Optic Patch Cord stands for Lucent Connector. The LC is a small form-factor fiber optic connector. LC connector uses a 1.25 mm ferrule, half the size of the ST. Also, it is a standard ceramic ferrule connector. The LC has good performance and is highly favored for single mode.
D4 Fiber Optic Adapters are used in connecting fiber optic active connectors. D4 Optical Adapter is made of zirconia or phosphor bronze sleeve.
FC Fiber Optic Patch Cord stands for Fixed Connection. It is fixed by way of a threaded barrel housing. FC-FC patch cords are typical in test environments and for single mode applications. FC connectors were designed for use in high-vibration environments. The FC connector is the most popular connector used today.It can be seen in every area of the communications environment, from a telecoms distribution room to a LAN closet the FC has set the standard for optical fiber connectors.
Description of this Industrial POE Ethernet Switch IES1204P-SFP Overview The IES1204P series Industrial POE Switch is the ideal solution for powering remote devices such as IP phones, video cameras,
Supports up to 2.5Gbps bit rates Hot-pluggable SFP footprint 1550nm DFB laser and PIN photo detector, Up to 20km for SMF transmission Compliant with SFP MSA and SFF-8472 with duplex LC receptacle Compatible with RoHS Single +3.3V power supply Real Time Digital Diagnostic Monitoring Operating case temperature: Standard: 0 to +70°C Industrial: -40 to +85°C