Products: cisco fiber media converter

 

china good hd video to fiber converter on sale

Description of this china good hd video to fiber converter on sale Item HD-Video to Fiber Converter Model NO. HDV-04 Description 4 Channel AHD/TVI/CVI to Fiber Converter Overview HD Video to fiber co

Hotsale HD Video to Fiber Converter

Description of this Hotsale HD Video to Fiber Converter Item HD-Video to Fiber Converter Model NO. HDV-08 Description 8 Channel AHD/TVI/CVI to Fiber Converter Overview HD Video to fiber converters ad

High Quality Fiber Media Converter AOM 1100D

AOM-1100D Serial 10/100M Fiber Media Converter translates the signal from a twist-pair 10/100Base-TX cable to 100Base-FX fiber optic cable, extends data transmission distance from 100m via copper cables to 120km by fiber optic cable, which supports LFP (Link Fault Pass-through) function & USB Powered.

China Fiber Media Converter AOM 3100

AOM-3100 Serial 10/100/1000M Fiber Media Converter translates the signal from a twist-pair 10/100/1000Base-T cable to 1000Base-X fiber optic cable, extends data transmission distance from 100m via copper cables to 100km by fiber optic cable

SFP+ SFP-B1032L-20 10Gbps SFP+ Bi-Di Transceiver 20Km Reach

Supports up to 10.7Gbps bit rates Hot-pluggable SFP+ footprint 1330nm DFB laser and PIN photodiode, Up to 20km for SMF transmission Compliant with SFP+ MSA and SFF-8472 with duplex LC receptacle Compatible with RoHS Single +3.3V power supply Real Time Digital Diagnostic Monitoring Operating case temperature: Standard:  0 to +70°C Industrial: -40 to +85°C

ST Bare Fiber Optic Adapter

ST Bare Fiber Optic Adapter can link bared optic and light source ,testing equipment, light appearance etc, and the products used for test appearance and temporary conjunction between fiber optics extensively (repair fiber optic cable urgently).  

Fiber Optic Attenuator AT-FM-SC

Adopting advanced attenuation fiber technology, The Build-out design can be easily inserted between the connector and the adapter to bring the optical power levels within the operating range of the receiver. The front of the attenuator is a male plug connector style, allowing the attenuators to be plugged directly into receiver equipment or adaptors in patch panel. The rear is a female socket adaptor allowing a patch cord to be mated into the back of the attenuator. The versatility of this design allows the Attenuators to be placed Inline, directly in front of the receiver, or at other points in the network such as distribution frames and cabinets. Their remarkable stability over a wide temperature range (-40 ºC to +75 ºC) permits their deployment in central offices, and in remote sites such as cabinets, huts or underground vaults. Available in single mode or multimode, FC, SC, ST, LC type.

Fiber Optic Attenuator AT-FF-SC

To ensure proper performance and to maximize the life of optical receivers, the power received by these photodetectors must fall within their dynamic or operating range. For this reason, fiber optic transmission systems often use Attenuators to reduce or balance the power in the passive optical network.