Products: cisco fiber to ethernet converter

 

High Quality Serial Fiber Converter AFM 244 for selling

Description of this High Quality Serial Fiber Converter AFM 244 for selling Item Serial Fiber Converter Model NO. AFM-244 Description RS232/485/422 to Fiber Optic Converter Overview AFM-244 series is

Fiber Optic Attenuator AT-LI-SC

Inline fixed attenuator can provide different degrees of attenuation according to needs. The product is used in different kinds of fiber optic transmission lines, according to specific needs to carry out precise attenuation. We use optical fiber structure in the linear fixed attenuator, therefore making the stability more reliable.

Chinese Supplier POE Fiber Switch AES3208P

AES3208P is 8 Port PoE 10/100/1000M Fiber Switch provide 8 Port PoE (Power over Ethernet) which compliance with IEEE802.3af & IEEE802.3at standard; Let you simply connect IP camera / IP phone / Wireless AP at remote site where AC or DC power unavailable. AES3208P also provide two Fiber Port can transmit data 0~120km from device to control center.

SFP-C25XXL-40 2.67Gbps CWDM SFP Optical Transceiver Hot Sale

Data-rate 2.67Gbps operation 18 CWDM DFB wavelengths laser and PIN photodetector for 80km transmission Compliant with SFP MSA and SFF-8472 with Duplex LC receptacle Digital Diagnostic Monitoring: Internal Calibration or External Calibration Compatible with SONET Compatible with RoHS +3.3V single power supply Operating case temperature: Standard :0 to +70°C

SFP-B1535L-80 155Mbps Bi-Di SFP Optical Transceiver 80km

Up to 155Mbps data links 1310nm FP laser and photo PIN detector for 20km transmission Compliant with SFP MSA and SFF-8472 with single LC receptacle Digital Diagnostic Monitoring: Internal Calibration or External Calibration Compatible with SONET Compatible with RoHS +3.3V single power supply Operating case temperature: Standard :0 to +70°C Industrial : -40 to +85°C 

Fiber Optic Attenuator AT-FM-ST

Adopting advanced attenuation fiber technology, The Build-out design can be easily inserted between the connector and the adapter to bring the optical power levels within the operating range of the receiver. The front of the attenuator is a male plug connector style, allowing the attenuators to be plugged directly into receiver equipment or adaptors in patch panel. The rear is a female socket adaptor allowing a patch cord to be mated into the back of the attenuator. The versatility of this design allows the Attenuators to be placed Inline, directly in front of the receiver, or at other points in the network such as distribution frames and cabinets. Their remarkable stability over a wide temperature range (-40 ºC to +75 ºC) permits their deployment in central offices, and in remote sites such as cabinets, huts or underground vaults. Available in single mode or multimode, FC, SC, ST, LC type.

SFP-C25XXL-80 2.67Gbps CWDM SFP Optical Transceiver Price

Data-rate 2.67Gbps operation 8 CWDM DFB wavelengths laser and PIN photodetector for 80km transmission Compliant with SFP MSA and SFF-8472 with Duplex LC receptacle Digital Diagnostic Monitoring: Internal Calibration or External Calibration Compatible with SONET Compatible with RoHS +3.3V single power supply Operating case temperature: Standard :0 to +70°C

MTRJ Fiber Optical Patch Cord

MT-RJ fiber optic patch cord stands for Mechanical Transfer Registered Jack. MT-RJ is a fiber-optic cable connector that is very popular for small form factor devices due to its small size. Housing two fibers and mating together with locating pins on the plug.