AOM-1100D Serial 10/100M Fiber Media Converter translates the signal from a twist-pair 10/100Base-TX cable to 100Base-FX fiber optic cable, extends data transmission distance from 100m via copper cables to 120km by fiber optic cable, which supports LFP (Link Fault Pass-through) function & USB Powered.
Data-rate 2.67Gbps operation 8 CWDM DFB wavelengths laser and PIN photodetector for 80km transmission Compliant with SFP MSA and SFF-8472 with Duplex LC receptacle Digital Diagnostic Monitoring: Internal Calibration or External Calibration Compatible with SONET Compatible with RoHS +3.3V single power supply Operating case temperature: Standard :0 to +70°C
The IES1104 series is a performance and cost-effective Industrial Ethernet Switch that meet the high reliability requirements of industrial network operations. It is designed to extend the distance of a network by converting Fast Ethernet data between twisted pair cabling and multi-mode or single-mode fiber-optic cabling.
Description of this Hot Sale HD Video to Fiber Converter Video made in China Item HD-Video to Fiber Converter Model NO. HDV-16 Description 16 Channel AHD/TVI/CVI to Fiber Converter Overview HD Video
HD Video to fiber converters adopt the advanced uncompressed HD composite video and high velocity digital optical transmission technologies which convert the HD video composite signals to optical signals to achieve long distance(as far as 80Km) transmission through fibers.
Up to 1.25Gbps bi-directional data links 1550nm DFP laser and PIN photo detector for 40km transmission Compliant with SFP MSA and SFF-8472 with single LC receptacle Digital Diagnostic Monitoring: Internal Calibration or External Calibration Compatible with SONET Compatible with RoHS +3.3V single power supply Operating case temperature: Standard :0 to +70°C Industrial : -40 to +85°C The transceiver consists of three sections: a DFP laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement (MSA). For further information, please refer to SFP MSA.
SFP Module sfp modules sfp ethernet
Fiber optic pigtails the typical use is to link the fiber optic cable with fiber optic equipment, the multi-pigtail with connector side is used to link the equipment, while the other side of the fan out pigtail is melted together with the fiber cable, by melting together the fiber glasses, it can reach a minimum insertion loss. Common types of fiber optic pigtails are usually with 0.9mm fiber cable diameter, and usually installed inside ODF unit. Most commonly used types are SC fiber optic pigtail, ST fiber optic pigtail, FC fiber optic pigtail, LC fiber optic pigtail, MT-RJ fiber optic pigtail, SC/APC fiber optic pigtail, and FC/APC fiber optic pigtail and E2000 fiber optic pigtail.