The IES3202P-SFP Industrial POE Switch is the ideal solution for powering remote devices such as IP phones, video cameras, wireless access points, alarms, traffic controllers, sensors and tracking devices, which are installed 100m far from a Power over Ethernet switch. In addition to transmitting data, the twisted-pair port also injects power down the cable, allowing a remote Power over Ethernet Device to operate without the need of any additional power source. All Power over Ethernet Powered Devices (IEEE 802.3af/at complaint) are supported, as the Power Sourcing Equipment (PSE) device can deliver a full 15.4W / 30W of power to the remote PD device.
The IES3202P-SFP features 2x 1000Base-X SFP Slot and 2 x 10/100/1000Base-T twisted-pair port. The SFP slot port for any kind of MSA-compliant pluggable 1.25G SFP Transceivers.The twisted-pair port has 2 x RJ-45 connector with a maximum operating distance of 100m.
The IES3202P-SFP Industrial Gigabit Ethernet Switch is designed to stand up to extreme temperature, surges, vibrations, and shocks found in industrialautomation, government, military, oil & gas, mining and outdoor applications, such as traffic management, oil and gas pipelines.
The IES3202P-SFPseries enables real-time deterministic network operation, requires no configuration and will instantly operate as soon as you power it up. Additionally, they can be installed by DIN-rail or wall-mounted, allowing users to deploy any mix of network conversions required.
Provide 2 x 10/100/1000Base-T
2 x 1000Base-X SFP Slot for Daisy-Chain and 1+1 Redundant Fiber
RJ45 support auto MDI/MDI-X function
Auto-negotiation speed, half/full-duplex
Max packet size: 10K bytes
Support VLAN (Controlled by DIP Switch)
Support Force 10M-150 meters (Controlled by DIP Switch)
Support 1+1 Fiber (Controlled by DIP Switch)
Support wide operating temperature (-40 ˚C~+85 ˚C)
Wide-range redundant power design (12~56VDC)
Power polarity reverse protect
Overload current resettable fuse present
Provide EFT protection for Power line
Support Ethernet ESD protection
DIN-Rail and Wall Mounting Installation
Low power consumption
DIP Switch Define
Default (10/100/1000M Auto-negotiation)
VLAN Logical Isolation
VLAN Physical Isolation
Force FX TX Port 100M
Note: The 1+1 Fiber function takes effect in using our same Industrial switch at both side; the one fiber device doesn't support this function.