The IES3202series is a high performance and cost-effective Industrial Gigabit Ethernet Switch that meets the high reliability requirements of industrial network operations. Itis designed to extend the distance of a network by converting Gigabit Ethernet data between twisted pair cabling and multi-mode or single-mode fiber-optic cabling.
The IES3202features2x 1000Base-X fiber port and 2 x 10/100/1000Base-T twisted-pair port. The fiber optic port features SC connector and operating distance from 550 to 120km depending on different Model. The twisted-pair port has 2 x RJ-45 connector with a maximum operating distance of 100m.
The IES3202 Industrial Gigabit Ethernet Switch is designed to stand up to extreme temperature, surges, vibrations, and shocks found in industrialautomation, government, military, oil & gas, mining and outdoor applications, such as traffic management, oil and gas pipelines.
The IES3202 series enables real-time deterministic network operation, requires no configuration and will instantly operate as soon as you power it up. Additionally, they can be installed by DIN-rail or wall-mounted, allowing users to deploy any mix of network conversions required.
Provide 2 x 10/100/1000Base-T
2 x 1000Base-X for Daisy-Chain and 1+1 Redundant Fiber
RJ45 support auto MDI/MDI-X function
Auto-negotiation speed, half/full-duplex
Max packet size: 10K bytes
Support VLAN (Controlled by DIP Switch)
Support Force 10M-150 meters (Controlled by DIP Switch)
Support 1+1 Fiber (Controlled by DIP Switch)
Support wide operating temperature (-40˚C~+85˚C)
Wide-range redundant power design (12~56VDC)
Power polarity reverse protect
Overload current resettable fuse present
Provide EFT protection for Power line
Support Ethernet ESD protection
DIN-Rail and Wall Mounting Installation
Low power consumption
DIP Switch Define
Default (10/100/1000M Auto-negotiation)
VLAN Logical Isolation
VLAN Physical Isolation
Force FX TX Port 100M
Note: The 1+1 Fiber function takes effect in using our same Industrial switch at both side; the one fiber device doesn't support this function.