10Gbps SFP+ Bi-Di Transceiver

Model NO.: SFP+ SFP-B1023L-20
Delivery: FOB/EXW
Minimum order quantity: 1 piece
Supply Ability: 5000 piece / Day
Country of Origin: CHINA
Stock Time: 5 Days

Quantity:

Product Description

Features

Supports up to 10.7Gbps bit rates
Hot-pluggable SFP+ footprint
1270nm DFB laser and PIN photodiode, Up to 20km for SMF transmission
Compliant with SFP+ MSA and SFF-8472 with duplex LC receptacle
Compatible with RoHS
Single +3.3V power supply
Real Time Digital Diagnostic Monitoring
Operating case temperature:Standard:0 to +70°CIndustrial: -40 to +85°C

Applications

10Gbps Optical systems
10GBASE-LR at 10.3125Gbps
10GBASE-LW at 9.953Gbps
LTE systems
Other Optical links

Description

The SFP+transceiversare high performance, cost effective modulessupporting datarate of 10Gbps and 20km transmission distance with SMF.

The transceiver consists of threesections: a DFB laser transmitter,a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.

The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472 digitaldiagnostics functions.

Absolute Maximum Ratings

Parameter	Symbol	Min	Max	Unit
Supply Voltage	Vcc	-0.5	4.5	V
Storage Temperature	Ts	-40	+85	°C
Operating Humidity	-	5	85	%

Recommended Operating Conditions

Parameter		Symbol	Min	Typical	Max	Unit
Operating Case Temperature	Standard	Tc	0		+70	°C
	Extended		-20		+80	°C
	Industrial		-40		+85	°C
Power Supply Voltage		Vcc	3.135	3.30	3.465	V
Power Supply Current		Icc			350	mA
Data Rate				10.3	10.7	Gbps
Transmission Distance				10		km

Optical and Electrical Characteristics

Parameter		Symbol		Min	Typical	Max	Unit	Notes
Transmitter
Centre Wavelength			λc	1270	1310	1350	nm
Side-Mode Suppression Ratio			SMSR	30	-		dB
Average Output Power			P_out	-6.5		-0.5	dBm	1
Extinction Ratio			ER	3.5			dB
Data Input Swing Differential			V_IN	180		850	mV	2
Input Differential Impedance			Z_IN	90	100	110	Ω
TX Disable	Disable			2.0		Vcc	V
TX Disable	Enable			0		0.8	V
TX Fault	Fault			2.0		Vcc	V
TX Fault	Normal			0		0.8	V
Receiver
Centre Wavelength			λc	1270	1310	1350	nm
Side-Mode Suppression Ratio			SMSR	30	-		dB
Average Output Power			P_out	-6.5		-0.5	dBm	1
Extinction Ratio			ER	3.5			dB
Data Input Swing Differential			V_IN	180		850	mV	2
Input Differential Impedance			Z_IN	90	100	110	Ω
TX Disable	Disable			2.0		Vcc	V
TX Disable	Enable			0		0.8	V
TX Fault	Fault			2.0		Vcc	V

Notes:

1. The optical power is launched into SMF.

2. PECL input, internally AC-coupled and terminated.

3. Measured with a PRBS 2³¹-1 test pattern @10312Mbps, BER ≤1×10^-12.

4. Internally AC-coupled.

Timing and Electrical

Parameter	Symbol	Min	Typical	Max	Unit
Tx Disable Negate Time	t_on			1	ms
Tx Disable Assert Time	t_off			10	µs
Time To Initialize, including Reset of TxFault	t_init			300	ms
Tx Fault Assert Time	t_fault			100	µs
Tx Disable To Reset	t_reset	10			µs
LOS Assert Time	t_loss_on			100	µs
LOS De-assert Time	t_loss_off			100	µs
Serial ID Clock Rate	f_serial_clock		100	400	KHz
MOD_DEF (0:2)-High	V_H	2		Vcc	V
MOD_DEF (0:2)-Low	V_L			0.8	V

Diagnostics

Parameter	Range	Unit	Accuracy	Calibration
Temperature	0 to +70	°C	±3°C	Internal
	-20 to +80
	-40 to +85
Voltage	3.0 to 3.6	V	±3%	Internal
Bias Current	0 to 100	mA	±10%	Internal
TX Power	-6.5to-0.5	dBm	±3dB	Internal
RX Power	-20to-1	dBm	±3dB	Internal

Digital Diagnostic Memory Map

The transceivers provide serial ID memory contents and diagnostic information about the present operating conditionsby the 2-wireserial interface(SCL, SDA).

The diagnostic information with internal calibrationor external calibration all are implemented,includingreceived power monitoring, transmitted power monitoring, bias current monitoring, supply voltage monitoring and temperature monitoring.

The digital diagnostic memory map specific data field defines as following.

Ordering information

Model No.	Product Description
SFP-S1013L-10	10Gbps,1310nm,LC,10km,0°C~+70°C, with DDM
SFP-S1013L-10I	10Gbps,1310nm,LC,10km,-40°C~+85°C, with DDM