The IMC3100P Industrial POE Switch is the ideal solution for powering remote devices such as IP phones, video cameras, wireless access points, alarms, traffic controllers, sensors and tracking devices, which are installed 100m far from a Power over Ethernet switch. In addition to transmitting data, the twisted-pair port also injects power down the cable, allowing a remote Power over Ethernet Device to operate without the need of any additional power source. All Power over Ethernet Powered Devices (IEEE 802.3af/at complaint) are supported, as the Power Sourcing Equipment (PSE) device can deliver a full 15.4W / 30W of power to the remote PD device.
The IMC3100P features 1x 1000Base-X fiber port and 1 x 10/100/1000Base-T twisted-pair port. The fiber optic port features SC connector and operating distance from 550 to 120km depending on different Model. The twisted-pair port has 1 x RJ-45 connector with a maximum operating distance of 100m.
The IMC3100PIndustrial Gigabit Ethernet Switch is designed to stand up to extreme temperature, surges, vibrations, and shocks found in industrialautomation, government, military, oil & gas, mining and outdoor applications, such as traffic management, oil and gas pipelines.
The IMC3100P series enables real-time deterministic network operation, requires no configuration and will instantly operate as soon as you power it up. Additionally, they can be installed by DIN-rail or wall-mounted, allowing users to deploy any mix of network conversions required.
UTP to fiber media converter
IEEE 802.3af/at complaint
RJ-45 port support auto MDI/MDI-X function
Auto-negotiation speed, half/full-duplex
Store-and-forward switching architecture
Support wide operating temperature (-40˚C~+85˚C)
Wide-range redundant power design (48-56Vd.c.)
Power polarity reverse protect
Overload current resettable fuse present
Provide EFT protection for Power line
Support Ethernet ESD protection
DIN-Rail and Wall-Mounted Installation
DIP Switch Define
Default (10/100/1000M Auto-negotiation)
Force 10M(150 meters)
Fiber Port Force 100M
Note: The two fiber device supports 1+1 Fiber function, the one fiber device doesn't support that.