1310nm FP laser and PIN photo detector for 2km transmission
Compliant with SFP MSA and SFF-8472 with single LC receptacle
Digital Diagnostic Monitoring: Internal Calibration or External Calibration
Metal enclosure, for lower EMI
Compatible with RoHS
+3.3V single power supply
Operating case temperature: Standard: 0 to +70ºCIndustrial: -40 to +85ºC
Switch to Switch interface
Switched backplane applications
Other optical transmission systems
SFP-M1213L-02 Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA), The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the FP laser and the PIN photo-detector .The module data link up to 2km in Multi-mode fiber.
The optical output can be disabled by a TTL logic high-level input of Tx Disable, and the system also can disable the module via I2C. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver or the link status with partner. The system can also get the LOS (or Link)/Disable/Fault information via I2C register access.